|
SealBoss ® Product Line: Concrete Repair Products Crack Injection Systems Waterproofing Products Joint Filler Compounds Cartridge Systems Specialty Coatings Equipment & Accessories
|
SealBoss ® provides commercial grade, professional quality concrete repair and waterproofing products, equipment and accessories for commercial and residential applications.
|
|
SealBoss 6500 QuickFix Polyurea Joint sealer, Polyurea Joint Filler and Mixer,
Fast Concrete Mender
For Larger Quantities call SealBoss directly at
714-662-4445
Static Mixer included
RANGE OF PPLICATION USES
To fill cracks, damaged control joints, or new construction joints on horizontal concrete
Designed specifically for industrial floor applications which receive heavy vehicle traffic, such as fork lifts or steel wheeled carts
|
Highly flexible, allowing small slab movement, yet strong enough to protect the vertical edges of concrete from spalling under extreme loading
Interior and Exterior . Only slight discoloration in UV exposure
|
TYPICAL APPLICATION ENVIRONMENTS
|
|
- Industrial Facilities - Warehouse Floors - Manufacturing Facilities - Pulp and Paper Mills - Bottling and Canning Facilities
|
- Airports - Water and Waste Water Treatment - Cold Storage Facilities - Food Processing Facilities - Freezers
|
TYPE OF MATERIAL
SealBoss 6500 QuickFix
is a technologically advanced
multiple application product. This polyurea is a moisture
insensitive, self leveling, 100% solids, two component, 1:1
ratio, very flexible elastomer.
6500 QuickFix
is an excellent joint and crack filler for
concrete in applications that are time critical. It works well in
adverse temperature conditions as the material cures rapidly
in ambient temperatures from -20F to 130F. The tack free free
time is 5 to 15 minutes. This permits to reopen the jobsite to
vehicle and foot traffic just one hour after the application.
APPLICATION
Clean the area of debris and contaminants, such as
oils, loose materials, dirt, rubber etc., to allow for good adhesion
of the product. Expose clean rough concrete for best results.
If using a saw to cut concrete and clean the crack,
remove all the dust from the cut out area. Make sure the area
is dry. Vacuum or blow off cement dust.
For bulk mixing, pre-mix each component thoroughly.
Proportion equal parts by volume of Component “A” and
Component “B” through appropriate metered mixing
equipment. Mix only the quantity that can be used within 2
minutes and do not allow mixed material to reside in static
mixing head or mixer for more than 2 minutes or nozzle
blockage may result.
Do not add solvents. They will prevent proper cure. Not
for sealing cracks and joints under hydrostatic pressure or with
extreme movement. Material is a vapor barrier after cure.
Minimum age of concrete must be 21-28 days, depending on
curing and drying conditions prior to applications.
TECHNICAL DATA
PHYSICAL PROPERTIES:
Color (A+B) Charcoal Gray,
Black, or other
Viscosity (mixed) Self Leveling
Mix Ratio (by volume) 1:1
Pot Life 100 grms at 77F 4 min
Tack Free , Thin Film at 77F 10-15 min
Initial Cure 60 min
Final Cure 5 days
% of Elongation ASTM D-412 200
Tensile Strength, psi ASTM D-412 700
Bond Strength, fully cured
clean concrete, psi ASTM C-882 400
Shore “A” Hardness ASTM D-2240 80-85A
Toxicity Essentially Non-Toxic in Cured Form
Resistance to Chemicals Resistant to Most Organic Solvents,
Mild Acids, Alkali and
Micro Organisms
Chemical Resistance Chart
available
PACKAGING:
1:1 ratio by volume units: 22/44/56 oz. Cartridges, 2 gal. Units, 10 gal. Units
22oz. cartridge yields 39 cu. in.
Shelf Life: I year in original unopened container.
Storage Conditions: Store at 55F-95 F.
Disposal: Empty containers must be drip free.