| | |
| Search By Manufacturer
| |
| | |
|
- > DIY Repair Kits, For Foundations, Walls, Floors
- > Concrete Repair, Injection, Waterproofing Equipment
- > Concrete Repair, Injection, Waterproofing Products
- > Floor Joint Fillers, Joint Repair, Caulking, DIY Kits
|
| | |
| Subscribe To Mailing List
| |
| | |
|
|
#1 LEAK STOPPER - OUR BESTSELLER! 1510 / 2+ SealBoss DIY Concrete Repair Leak and Water-Stop Kit - Seal up to 50 ft of leaking concrete cracks
|
MSRP: $485.00
Your Price: $359.99
Online Savings: $125.01 (26 %)
Manufacturer: SealBoss Corp.
|
</>
|
SealBoss ® Product Line: Concrete Repair Products Crack Injection Systems Waterproofing Products Joint Filler Compounds Cartridge Systems Specialty Coatings Equipment & Accessories
|
SealBoss ® provides commercial grade, professional quality concrete repair and waterproofing products, equipment and accessories for commercial and residential applications.
For more detailed product information please look at these links:
|
|
Basement Crack and Foundation Leak Stop Kit by the Leader in Industrial Crack Injection Technologies Professional Pressure Crack Repair & Leak-Stopper - Water Stop System by SealBoss DIY KIT 1510 / 2+ now you can seal up to 60 ft of leaking concrete cracks * * (depending on crack properties, width, depth and other factors)
For Smaller Jobs And Home Repairs Seal Cracks Permanently In Basements, Pools and other Structures
This Commercial Grade Do It Yourself Kit includes: 2 gal 1510 Water-Stop-Foam or 1570 Flexible Water-Stop-Foam Professional Grade PU-Foam Grout 0.2 gal 15x Accelerator 40 Injectors (Professional Grade Packers) 1 Hand Injection Gun Modified For PU Injection 1 Injection System Manual, Product Information 1 Pair Protective Gloves Latex Satisfied Customer Testimonial
Customers using SealBoss D.I.Y. Kit
Purchased your water stop crack repair kit [SealBoss DIY Water Stop 1510] from Dependable Depot for concrete work in my own basement.
Product worked fantastic. No other specialty concrete repair companies in my area to my knowledge. I enjoyed working with your product and am looking to do some basement repair for side work.
I am currently employed with a roofing, siding, and light construction contractor. Looking for forward to receiving more information.
Thanks, Mike Wyoming
Craig, Just wanted to say how glad I was to have your product on Monday. I live in Cobb County, GA and the water came pouring in during our recent flooding. I had already actually patched one of my two retaining wall cracks and already had the holes drilled for the second. However, I had not pumped the second one, so I got a desperate call from my wife for help when the rain hit that critical point and water stacks up against the front of our house. I got there from work as quickly as I could and still had to tighten the packers and mix the resin, but I had the water stopped inside of 15 minutes and we got nothing wet except for a few towels! What a lifesaver! There are a couple of areas that I just could not get the foam into so I am going to have to drill a few holes to make certain everything is sealed. I will need to order a few more more packers for that. I have bragged to many guys here at work about the DIY system and several have asked for your info for themselves or others, so I have passed your website along to quite a few already!
Thanks Again, Michael Georgia
|
</>
POLYURETHANE (PU)
|
CHARACTERISTICS:
|
EPOXY (EP)
|
- Flexible to semi-flexible sealants with little structural strength - React to foams (water-stops), gels and solid (non cellular) flexible or semi flexible sealants. - Classified as hydrophobic (foams/resins) for crack injection, joints voids or hydrophilic (foams/gels) for curtain, bladder injection behind structures. Both groups are water activated for use in wet environments - Superior water-stop capabilities - Single or two component, accelerators common. Viscosities low to medium. Very resistant, long term solution.
SealBoss recommended Products: Foams: 1510, 1570, 1572 Flexible resin: 1400 LV-Resin Line Gel/Foam: Flexgel2
|
- Rigid, very strong adhesive for structural repairs in mainly dry environments, typically reduced adhesion on wet surfaces. Excellent to regain structural strength in torn structures: earthquake damage, extended stress damage - Not a water-stop material and does not tolerate extended movement. - Two component. Viscosities from very low to paste. Very resistant, long term solution.
SealBoss recommended Products: Resin: 4040 Paste/Putty: 4000 Quickseal Cartridge System: 4000 Epoxy Cartridge System
|
POLYURETHANE
|
APPLICATION TECHNIQUES:
|
EPOXY
|
- Mechanical packer injection at higher pressures 300-3000 psi Reason: PU injection is often performed in a wet environment where adhesives for surface ports cannot be used. Mechanical packers are installed by drilling a hole into the structure which the packer fits snugly. The packer is tightened mechanically for high pressure injection. PU immediately reacts with moisture in the crack increasing resistance of product flow which explains the high injection pressures.
SealBoss recommended Products: Complete line of packers: S-Type, R-Type, custom sizes, Hammer-in packers, surface ports, specialty packers
|
Conclusion: PU generally needs higher pressures and therefor the more sophisticated connectors / packers. There are many exceptions. For example curtain injection with PU gel into the space between structure and soil needs lower injection pressures but higher rates of material flow. The filling of larger voids and joint injection also uses lower pressures. PU injection through surface ports is not common, but high pressure epoxy injection through packers is seen more frequently. Reasons could be very thick concrete to be penetrated or damp / wet surface conditions.
|
- Surface port injection at lower injection pressures 30-800psi Reason: Injection is typically done in dry environments and surface ports can be attached easily with epoxy adhesive. Holes do not have to be drilled . However the crack surface between the ports has to be surface sealed to prevent leakage during injection. The viscosity of the epoxy resin stays low during the injection process, resulting in much lower injection pressures.
SealBoss recommended Products: surface ports, specialty ports
|
POLYURETHANE
|
PUMPING TECHNIQUES / THE EQUIPMENT
|
EPOXY
|
- Single component equipment for most water-activated hydrophobic PU foams, accelerator to be added prior to pumping. - Either single or two component equipment for true two component PU resins such as 1400 LV-Resin Line. - Either single component or multi-ratio two component equipment for hydrophilic PU Gels based on the application and product. In multi-ratio pumping one component carries a high water content.
Single component pumps include inexpensive hand held devices, hand pumps and electric pumps. Multi ratio devices can be manual, electric and pneumatic. Some PU injection pumps can be used for epoxy injection (with limitations). SealBoss supplies PU as small as 1 gal units. We do not supply PU in cartridges for the following reasons: 1. Reduced shelf life in cartridge due to high moisture sensitivity, 2. Limited Injection pressure. For small jobs we recommend our (3000psi) handgun and a 1 gallon unit.
SealBoss recommended Products: Hand held guns, manual pump HP100, electric pumps IP395 Pro, P1001
|
Final Remarks: Injection Technology has become more refined and in cases more confusing. Modern products are very capable, but similar characteristics are not easily distinguished by the untrained person. To avoid costly failures caused by product/job mismatches, SealBoss provides thorough technical support to make your job a good one. Please make use of our services - we are just a phone call away.
|
- Two component equipment for most epoxy resins for ease of use and precise mixing. - Single component equipment for small jobs and epoxy with longer gel-time. Observe gel time closely and clean equipment thoroughly. Epoxy is a very strong adhesive and may render a pump unusable. - Pneumatic or manual guns for cartridge systems / smaller jobs
Two component injection pumps are pneumatic or electric. SealBoss supplies EP resins and paste also in cartridges for the following reasons: 1. Ease of use, 2. Cost, 3. EP is not very moisture sensitive and injection pressures can be handled by quality cartridges and dispensers. Dispensers are manual or pneumatic. With very few exceptions EP pumps are not to be used for PU injection.
SealBoss recommended Products: Hand held guns, pneumatic pump PA3000, 4000 Cartridge System
|
|
MSRP: $295.00
Your Price: $199.99
Online Savings: $95.01 (32 %)
D.I.Y. - 6500 - Fast Cure QuickFix 6500 Concrete Repair Kit - For "10 Minute" Repairs - by SealBoss (Flexible and High Strength Polyurea available) Call For Details.
|
|
|
|
|
|
|
|
MSRP: $2.99
Your Price: $2.48
Online Savings: $0.51 (17 %)
13-70Zi Zinc Mechanical Packers, 1/2" x 3"
| | | |
Product Reviews
|
| | |
| Shopping Cart
Your cart is empty.
| |
| | |
|
|
|